OLED Luxe Paintball Gun – DLX Technologies
Jan11

OLED Luxe Paintball Gun – DLX Technologies

Recently confirmed by Daryl Trent, early February will see the release of the OLED Luxe. The latest installment of the prestigious DLX Technologies brand. Lots of questions have been raised about the gun, so we have done our own back avenue fact gathering to bring our readers the most accurate up to date information on this new paintball marker. The Name – DLX has confirmed that this gun will not be officially labeled the 3.0, despite the fact that this would follow their previous method of updating the gun using this nomenclature. They have instead labeled this version of the Luxe the “OLED” this is referring the the integration of an OLED screen and board system to the newest version of the gun. The Changes – The DLX Luxe’s internal operations will remain virtually unchanged, baring a few immeasurable tweaks more related to production than performance. The major change is the integration of the OLED system into the frame. The OLED readout will be rear facing toward the player very similar to that used by Bob Long in his frames. The board system will retain the use of the famous speaker that has become a much loved feature of the Luxe paintball gun. It is important to note however, that the speaker can be removed and the board will still function without issue – for players that want to mute the gun in favor of using the OLED. The OLED screen itself will plug into the board, eliminating the need for additional wiring harness or ribbon cables, this means that the un-cluttered nature of the Luxe grip frame will remain intact. The previous “cats eye” shaped button will be replaced by a silver diamond shaped button located below the screen. This is a welcome change as some players did have issues with accidentally pressing the 1.0 button while during play. Changes made to the 2.0 eliminated this issue, but it is good to see DLX continually improving this feature. The screen being rearward facing means that all current grips produced for the Luxe will continue to fit the gun. The charger, battery, solenoid,and eye ribbon will also remain backwards compatible. The body will remain the same milling as it has since reaching 2.0 status, the eye securement will not change nor will the milling lines. DLX has continued to innovate with regard to their anodizing process and is set to release some limited runs of the 2.0 and the OLED in the coming months. (unconfirmed) The OLED will ship with an all new semi-rigid case, with two divided halves. The gun will be stored in one side, and the barrel...

Read More
Empire Dfender Unboxing and Review
Dec23

Empire Dfender Unboxing and Review

The Empire Dfender is a true game changer. The innovative feed system allows the hopper to be moved down and away from the enemies line of fire, and lets you get a clear view of the field. The super lite body is made from Magnesium, a strong and rigid material that insures the Dfender is just as tough as it looks. The selector switch allows quick changing of modes, and can be locked out for tournament play. The Dfender paintball gun from Empire is truely unique. Check out our video below for a complete run down! FEATURES: High performance paintball marker with integrated loader Magnesium shells for high strength and light weight Break Beam Eyes in breech prevent ball chops Selector switch with 5 Firing modes – Semi, Burst, Ramping, Full Auto and Select Fire On/Off Regulator with easy-to-mount T-Slot rail Smooth, programmable bearing trigger with 3-way adjustment Removable side Picatinny rails and top Picatinny rails for accessories FUNCTIONS: Inline pressure controlled poppet firing engine offers accurate fire and smooth shooting Proven Z2 loader performance with auto anti-jam Loader activates upon trigger pull, so constant feeding is guaranteed Capable of firing 20bps with continuous loading Self calibrating loader speed sensor Tool-less basic maintenance/battery change Battery level indicator 6 AA Operation for all electronics INCLUDED ITEMS: Includes both a standard magnetic lid and speed feed lid Ported, aluminum barrel with three Super Freak inserts (.680, .685, .690) Additional Super Freak Apex2 barrel that creates shots that curve onto targets Multi-position sling adapter for those long treks to the...

Read More
GOG Enmey Paintball Gun Review
Jan21

GOG Enmey Paintball Gun Review

Changing the game forever, we have come to expect this from GOG paintball. A true innovator in the paintball industry GOG has changed the game with the newest release of the GOG Enmey. GOG Paintball has done away with the standard internals found in many paintball guns and introduced a ‘wear-less’ design that does not use any metal on metal contact. The BIG deal to all of this is GOG Paintball is so confident in this new design it has offered the first of its kind a LIFETIME WARRANTY on a paintball marker. Fighting the eNMEy Available in 6 exciting colors the Enmey is sure to be a #1 seller this year. No other paintball gun in the world comes with a lifetime warranty. The GOG eNMey paintball gun is available in Racer Red, Razor Blue, Freak Green, Titanium Silver, Rally White and Jet Black. Check out the details of this shooting machine! Using a truly pneumatic design, the GOG Enmey has no sear, no hammer and no metal on metal wear points. This new design is perfect for the any player that uses their paintball gun every weekend or for rental use to cut down on replacement parts cost. The vertical regulator also gives the marker the option of being used with low pressure operation to improve consistency and increase the efficiency of the marker for tournament users. The Enmey runs at 160 psi providing smooth operation and reducing marker kick for better accuracy. The internal pneumatic operation can be run off of either CO2 or HPA and has been engineered to protect internal components from possible pressure spikes seen with liquid CO2 usage. Based on the tournament proven spool valve design, the GOG Enmey gives players speed and accuracy on the field. GOG Paintball has also made the Enmey easy to maintain allowing players to inspect and access both the bolt and the main valve assembly in seconds. The Enmey’s bolt uses a low force cycle, thanks to the low pressure operation, that reduces chops, miss feeds, and bounce while firing. The GOG Enmey Paintball Guns are both light weight and durable being built off of an aluminum frame with a composite outer shell to protect the marker. If you must have electronic firing modes, the GOG eNMey paintball gun does have an E trigger upgrade. Unlike most E triggers, this upgrade is not a sear tripper, and provides players with true electro-pneumatic operation and even a lighter trigger pull.   Features of the new eNMEy include: • True Pneumatic Design – No hammer, no sear, no metal-on-metal wear points – for field rental use, there are...

Read More

Exalt Paintball Releases new Launch Bolt for the Geo 2.0 and 2.1 Paintball Guns

Its time to upgrade your Planet Eclipse Geo Paintball gun with one of the coolest upgrades released to date the new Exalt Bolt for the Geo 2 and Geo 2.1. Exalt has stepped up the game and become a big player in paintball gun upgrades. The new Exalt Launch bolt for the Geo is the first of many new Launch bolt to be released over the next few months for many of the most popular paintball guns in the world. Check out all the features of the Launch bolt. Upgrade your Geo 2.0 or 2.1 Paintball gun with a new Exalt Launch Bolt. Now you can launch your game to the next level with a Geo soft touch bolt Tip. The new Exalt Launch bolt is designed to be soft on Paintballs and hard on your opponents, It is specifically designed to handle the most brittle paintballs without breaking in your paintball marker. The Launch Bolt Improves consistency & reduces recoil to give you more accurate shot. Features STBT (Soft Touch Bolt Tip) High Flow Airpath Super Soft on Paint Eliminates Ball Rollback Reduces Ball Clipping Reduced Mass Reduces recoil Increases...

Read More

Planet Eclipse Winter Sale

The clock is ticking and Christmas is right around the corner…….. This can make a great stocking stuffer too!!!

Read More

DP Engineering: G5 Release

A. Redesigned Low-Profile Clamping Feedneck B. Subsonic Bolt Engine C. Power Button/Programming D. Stealth Profile RAPS ASA E. Unibody Low-Pressure Stinger Frame F. Wave Trigger G. Eye Cover H. RIPTIDE Regulator (OPR) I. DP Single 13″ Barrel Length: 19.4inches / 493.4mm Height: 7.9inches / 202.9mm Weight: 820g / 1.8lbs (w/ battery) Operating Pressure: 200psi/280fps DP Engineering continues to strive for the exceptional design, combined with the standards of today’s players. DP’s years of experience in craftsmanship & intricate design brings forth a high quality marker, loaded with features such as the Stinger Frame, Wave Trigger, Subsonic Bolt Engine, & Riptide Regulator. DP is proud to proclaim the intricacy in design, simplified by Engineering, the all new G5. Staying ahead of the curve. The G5’s Unibody Frame, Milled from high-grade Aluminum, houses the Inline reinforced hose-free design. The Stinger Frame includes an improved reinforced frame-structure to accurately fit frame-to-body. Cutting edge technology, stamped with ingenuity. In-line Pressure Frame, hose-free design New Style Frame, Slim & Beveled contour Improved reinforced frame structure to accurately fit frame to body. Aggressive Trigger Guard & Frame The Engineer’s of DP invigorates the Riptide Regulator. A superior design, the Riptide Regulator’s Internal components are compact, durable, and light weight. The Riptide Regulator utilizes the riptide technology & is comprised of only a 7 stationary O-ring Build. Compact & Durable Components Light weight OPR Internals Riptide Technology Operation 7 O-Ring System Regulation System The G5’s Subsonic Bolt Engine high performance is combined with a high efficiency. Redefined Bolt & Backcap components generating a fluid motion during bolt-actuation with a low pressure operation of 200 PSI. DP’s Patented Dump-Valve is supported by ingeneously designed breech, generating Anti-Bolt Stick Motion. Redefined Bolt & Back Cap components Low pressure Operation: 200PSI – Efficient by DP’s Standards Ported bolt for pressure through bolt Patent Dump-Valve Design supported with ingenious breach design to generate anti-bolt stick motion. DP Engineers continue to reinvent & improve technologies, such as the Low-Profile Patented Clamping Feedneck. Improved qualities such as a cushioned lever lock, reducing wear. (U.S. Patent – US7252080B2) Low-Profile Patent Clamping Feedneck Cushioned Lever Lock, reducing wear New Locking Nut for increased grip The G5’s Innovative Wave Trigger is fully milled & constructed with dual bearings & critical pivoting motion. The breakaway magnet is assisted with a compression spring, fit for high performance. The Wave Trigger allows fine tuning for increased trigger sensitivity on a 3-Axis adjustment plane. This adjustable plane also grants a, “Zero” side play for extreme comfort & high performance. Full Aluminum Milled Trigger – precise & accurate Magnet Break Away System with Spring assist & return Balanced Trigger, 3-axis...

Read More